Megapixel IP Network Camera, LPR, ANPR, NVR, PoE, IoT, On Board Camera, vehicle camera, AIoT video - Network surveillance solution - On-board Hardware Platform, Intel® Core™ i5/i7

NRM302

On-board Hardware Platform,
Intel® Core™ i5/i7 , 2 x 2.5" HDD
1 x CF, 4 x Mini-PCIe, WiFi/3G/GPS,
Built-in Power Protection (9V-36V DC)

Intel® Core™ processor dual core i5-4300U/i7-4650U
Three SIM cards + dual WWAN modules
Dual externally accessible SATA 3.0 SSD/HDD, CFast storage
Built-in U-blox UBX-G6010 GPS, optional Dead Reckoning
Built-in CAN 2.0B., optional OBDII function (SAE J1939/J1708)
Wake on RTC/SMS via WWAN module
Voice communication via WWAN module
Compliant with US military anti-vibration standard MIL-STD-810G
Rich expansion capability: 4 x mini-PCIe sockets

NVR: NRM302
CPU	Intel® Core™ processor dual core i5-4300U/i7-4650U
Memory	2 channel 204-pin DDR3L SO-DMIM socket support 1333/1600MHz up to 16GB, default 4G
Storage	2 x 2.5”SATA 3.0 SSD/HDD (externally accessible), RAID 0/1 supported (optional lockable storage available) 1 x CFast (externally accessible)
Expansion	1 x full size Mini-PCIe socket (USB 2.0) 1 x full size Mini-PCIe socket (USB 2.0 + PCIe) 1 x full size Mini-PCIe socket (USB 2.0 + PCIe) 1 x half size Mini-PCIe socket (USB 2.0 + PCIe)
Function	1 x default U-blox NEO-M8N GNSS module for GPS/Gloness/QZSS/Galileo/Beidou Optional modules with Dead Reckoning available, built-in G-sensor
Software Support	Windows 8, WES8, Window 7, WES7, Linux kernel 3.X
I/O Interface-front	4 x LED for power, storage, WWAN, WLAN 2 x externally accessible SATA 3.0 SSD/HDD tray, RAID 0/1 supported (optional lockable storage available) 1 x dual USB type A connector for USB 3.0 port + USB 2.0 port 2 x externally accessible SIM card socket (selectable) 1 x phone jack 3.5mm for 1 x Mic-In 1 x phone jack 3.5mm for 1 x Line-Out 1 x externally accessible CFast card socket with cover 1 x event button (trigger type) 1 x reset button 3 x antenna hole for WWAN/WLAN/BT
I/O Interface-rear	1 x 9~36VDC input with ignition 1 x dual USB type A connector for USB 3.0 port + USB 2.0 port 2 x RJ45 10/100/1000 Fast Ethernet with LED 1 x phone jack 3.5mm for 1 x Mic-In 1 x phone jack 3.5mm for 1 x Line-Out with 1.5W output each 1 x DB-15 VGA. Resolution up to 2560 x 1600 @60Hz 1 x DP port. Resolution up to 2560 x 1600 @60Hz 2 x DB-9 RS-232 1 x DB-9 RS-232/422/485 (RI/5V/12V selectable) 1 x DB-9 for CAN 2.0B (optional CAN Bus 2.0B Mini-PCIe card), 2 x MCU-DI and 2x MCU-DO 1 x 16-pin terminal block 1 x CAN Bus 2.0B (on board) 1 x optional OBDII module (ASE J1939 or J1708) 8 x Programmable GPIO (Digital Input) Input voltage (internal type): 5VDC TTL (default) Input voltage (source type): 3~12VDC (Digital Output) Digital Output (sink type): 5VDC TTL (default), max current: 20mA Digital Output (source type): 3~24VDC, max current: 150mA 1 x 12VDC output (2A), SM Bus 4 x antenna hole for WWAN/ WLAN/ BT/GPS 1 x Fuse (15A)
Power Management	Selectable boot-up & shut-down voltage for low power protection by software Setting 8-level power on/off delay time by software Status of ignition and low voltage can be detected by software Support S3/S4 suspend mode
Dimension	260 mm (W) x 206 mm (D) x 79.5 mm (H) (10.24” x 8.11” x 3.13”)
Environment	Operating temperature : Ambient with air -30°C to 60°C Storage temperature : -35°C to 85°C Relative humidity : 10% to 90% (non-condensing) Vibration (random) : 1.5g@5~500 Hz (in operation, HDD), 2g@5~500 Hz (in operation, SSD) Vibration (SSD/HDD) : Operating : MIL-STD-810G, Method 514.6, Category 4, common carrier US highway truck vibration exposure Storage : MIL-STD-810G, Method 514.6, Category 24, minimumintegrity test Shock (SSD/HDD) : Operating : MIL-STD-810G, Method 516.6, Procedure I, functionalshock=20g Non-operating : MIL-STD-810G, Method 516.6, Procedure V, crashhazard shock test=75g
Certification	CE approval, FCC Class B, E13 Mark
Ordering Information	NRM302-50x: with i5 CPU; NRM302-70x: with i7 CPU