|
NVR: NRM301
|
|
CPU
|
Intel ® Atom™ processor quad core E3845, 1.91GHz
|
|
Memory
|
1 x 204-pin DDR3L SO-DIMM socket support 1066MHz/1333MHz up
to 8GB
|
|
Storage
|
1 x 2.5” SSD/HDD SATA 2.0 (externally accessible, optional lockable storage available)
1 x CFast (externally accessible)
|
|
Expansion
|
1 x full size Mini-PCIe socket (USB 2.0)
1 x full size Mini-PCIe socket (USB 2.0)
1 x full size Mini-PCIe socket (USB 2.0 + PCIe)
1 x half size Mini-PCIe socket (USB 2.0 + PCIe)
|
|
Software Support
|
Windows 8, WES8, Window 7, WES7, Linux kernel 3.X
|
|
I/O Interface-front
|
4 x LED for power, storage, WWAN, WLAN
2 x externally accessible SIM card socket (selectable)
1 x phone jack 3.5mm for 1 x Mic-In
1 x phone jack 3.5mm for 1 x Line-Out
1 x externally accessible 2.5” SATA 2.0 SSD/HDD tray
1 x externally accessible CFast card socket with cover
1 x event button (trigger type)
1 x reset button
1 x type A USB 3.0 compliant host, supporting system boot up
4 x antenna hole for WWAN/WLAN/BT
|
|
I/O Interface-rear
|
1 x 9~36VDC input with Ignition
2 x type A USB 2.0 compliant host, supporting system boot up
2 x RJ45 10/100/1000 Fast Ethernet with LED
1 x phone jack 3.5mm for 1 x Mic-In
1 x phone jack 3.5mm for 1 x Line-Out
1 x DB-15 VGA, resolution up to 2560 x 1600 @60Hz
1 x DP port, resolution up to 2560 x 1600 @60H
1 x antenna hole for GPS
2 x DB-9 RS-232 (RI/5V/12V selectable)
1 x DB-9 RS-422/485
1 x DB-9 for CAN 2.0B (optional CAN Bus 2.0B Mini-PCIe card),
2 x MCU-DI and 2 x MCU-DO
1 x 16-pin terminal block
1 x CAN Bus 2.0B (on board)
1 x optional OBDII module (ASE J1939 or J1708)
8 x GPIO (Programmable Digital Input or optional isolation)
Input voltage (internal type) : 5VDC TTL (default)
Input Voltage (source type) : 3~12VDC (Programmable Digital Output or optional isolation)
Digital Output (sink type) : 5VDC TTL (default), max current : 20mA
Digital Output (source type) : 3~24VDC, max current : 150mA
1 x 12VDC output (2A), SM Bus
|
|
Power Management
|
Selectable boot-up & shut-down voltage for low power protection by software
Setting 8-level power on/off delay time by software
Status of ignition and low voltage can be detected by software
Support S3/S4 suspend mode
|
|
Dimension
|
260 mm (W) x 176 mm (D) x 50 mm (H) (10.24” x 6.93” x 1.97”) Weight : 2.1kg
|
|
Environment
|
Operating temperature : Ambient with air -30°C to 70°C (SSD)
Storage temperature : -35°C to 85°C
Relative humidity : 10% to 90% (non-condensing)
Vibration (random) : 1g@5~500 Hz (in operation, HDD), 2g@5~500 Hz (in operation, SSD)
Vibration (SSD/HDD) :
Operating : MIL-STD-810G, Method 514.6, Category 4, common carrier US highway truck vibration exposure
Storage : MIL-STD-810G, Method 514.6, Category 24, minimumintegrity test
Shock (SSD/HDD) :
Operating : MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g
Non-operating : MIL-STD-810G, Method 516.6, Procedure V, crash hazard shocktest=75g
|
|
Certification
|
CE approval, FCC Class B, E13 Mark
|
.png)
